CONCRETE

Three basic components of any concrete are water, cement and aggregate, and each one has influence on the quality of concrete in a greater or lesser extent.
Transkop have an effect on all three components by regular quality controls as a quality concrete can be made only of good quality ingredients. Transkop for their needs and the needs of third parties is in possession of separation of gravel from the wet washing and exploitation of the gravel and therefore the quality of aggregates required for a good concrete is controlled.

PRODUCTION OF CONCRETE

Transkop is a fully automated new ready-mix plant, which consists of modern equipment and controls that leads to the required goal and that is the consistent quality of concrete.

All control of producing concrete is overseen through daily analysis by Transkop's laboratory equipped with CONTROL equipment which is intended not only to monitor and control the work but also to meet various needs and requirements of customers for special concrete through the use of additives and through changes in compositions, thus maintaining high quality of concrete.

CLASS OF CONCRETE

There are 16 main types of compositions for making ready-mix concrete in Transkop:
MB10; MB15; MB20; MB20S; MB20P; MB25; MB25s; MB25p; MB30; MB30s; MB30p; MB35; MB35s; MB35p; MB40; MB40s

CAPACITY CONCRETE PLANT

The capacity of the new plant is 1.50m3 per mixer which is approximately 80m3 per hour of work. In order to have an effective and good quality delivery of ready-mix to customers, Transkop is in possession of ready-mix trucks of different volumes, which can meet the needs for large amounts of concrete on a construction site or to supply few sites at the same time.

Transkop owns concrete pumps, of which the bigger one has the range of up to 36m height. The crane pump is divided into three parts, which meets the needs of all of the highest and the most difficult objects and inaccessible or closed facilities with a minimum roof clearance.